3 Port PCI High Speed USB 2.0 Adapter Card (3Ext/1int) (PCI330USB2) 3Ware 3War Internal SATA. Stratitec ICUSB25 USB 2.0 5-PORT Pci Upgrade Card. Computer has one USB 2.0 controller and three (or five, if you enable all the ports) USB companion controllers that report themselves as USB 1.1 devices. If you plug a USB 2.0 device into any port, the device functions at USB 2.0 speeds; the controller handles the logic internally.
Audiomidittweaker, welcome, this is such a random issue, even if is successful on someone else identical Mac, that is no indication that it will be on your machine being that so much depend on what you plug into these cards. I have a Adaptec USB PCI card it supports sleep and deep sleep, as long as there is no jump drive, Flashdrive or any other device without it own power supply plug in while sleeping.it was once an on going post but I see it was last updated:.My advice would be to check out the chipset in that card, if is the same as the other then expect the same results.JoePower Mac G4 Gigabit Ethernet Mac OS X (10.3.9) 1.5 GB Ram, ENCORE/ST G4, Tempo SATA, ATI Radeon 9000, Adaptec 4000. When I talked to the Mac specialist at my local Mirco Center, he said, 'Take one home try with on peripheral attached if it works keep it, if not bring it back'. That's all I can tell you, there is no yes or no answer here.Do a 'sleep' search above and you will get enough material to fill a library, read it all and you will still not have a yes or no answer on this matter.Also remember there are no standards for third party manufacturer to follow for making products for our computers.JoePower Mac G4 Gigabit Ethernet Mac OS X (10.3.9) 1.5 GB Ram, ENCORE/ST G4, Tempo SATA, ATI Radeon 9000, Adaptec 4000. I just bought a 5-port Belkin USB card and have similar problems. I have found the computer deep sleeps if I remove all peripherals connected to the card.
Beyond sleep issues, I'm not sure if the card works at all with anything that is not self-powered. I installed the card at pci slot 4, and I may move it back to slot 2 (next to video card) and see if it works better there.
.JPG/revision/latest?cb=20080610041429)
I didn't place the card at slot 2 in the first place because I was concerned about overheating- it would be very close to the video card. I guess I'll take the advice above and start reading other discussions!933mhz quicksilver Mac OS X (10.3.9). I had great success with the Belkin PCI USB 2.0 and Firewire cards.
My quicksilver G4 sleeps and wakes every time since the installation. I have many peripherals attached.
Ipod via usb, older firewire ipod, canon camera, 2 scanners and a couple external HDs. I have yet to hit any peripheral power on/off combination that causes deep sleep problems with the 2 cards.
Before trying the Belkins items, I had bad experiences with Sonnet and OWC cards in my quicksilver though the sonnet worked fine in an older G4 DA. Apple Footer.This site contains user submitted content, comments and opinions and is for informational purposes only. Apple may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Apple can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the.
Popular Posts
3 Port PCI High Speed USB 2.0 Adapter Card (3Ext/1int) (PCI330USB2) 3Ware 3War Internal SATA. Stratitec ICUSB25 USB 2.0 5-PORT Pci Upgrade Card. Computer has one USB 2.0 controller and three (or five, if you enable all the ports) USB companion controllers that report themselves as USB 1.1 devices. If you plug a USB 2.0 device into any port, the device functions at USB 2.0 speeds; the controller handles the logic internally.
Audiomidittweaker, welcome, this is such a random issue, even if is successful on someone else identical Mac, that is no indication that it will be on your machine being that so much depend on what you plug into these cards. I have a Adaptec USB PCI card it supports sleep and deep sleep, as long as there is no jump drive, Flashdrive or any other device without it own power supply plug in while sleeping.it was once an on going post but I see it was last updated:.My advice would be to check out the chipset in that card, if is the same as the other then expect the same results.JoePower Mac G4 Gigabit Ethernet Mac OS X (10.3.9) 1.5 GB Ram, ENCORE/ST G4, Tempo SATA, ATI Radeon 9000, Adaptec 4000. When I talked to the Mac specialist at my local Mirco Center, he said, \'Take one home try with on peripheral attached if it works keep it, if not bring it back\'. That\'s all I can tell you, there is no yes or no answer here.Do a \'sleep\' search above and you will get enough material to fill a library, read it all and you will still not have a yes or no answer on this matter.Also remember there are no standards for third party manufacturer to follow for making products for our computers.JoePower Mac G4 Gigabit Ethernet Mac OS X (10.3.9) 1.5 GB Ram, ENCORE/ST G4, Tempo SATA, ATI Radeon 9000, Adaptec 4000. I just bought a 5-port Belkin USB card and have similar problems. I have found the computer deep sleeps if I remove all peripherals connected to the card.
Beyond sleep issues, I\'m not sure if the card works at all with anything that is not self-powered. I installed the card at pci slot 4, and I may move it back to slot 2 (next to video card) and see if it works better there.
.JPG/revision/latest?cb=20080610041429\')
I didn\'t place the card at slot 2 in the first place because I was concerned about overheating- it would be very close to the video card. I guess I\'ll take the advice above and start reading other discussions!933mhz quicksilver Mac OS X (10.3.9). I had great success with the Belkin PCI USB 2.0 and Firewire cards.
My quicksilver G4 sleeps and wakes every time since the installation. I have many peripherals attached.
Ipod via usb, older firewire ipod, canon camera, 2 scanners and a couple external HDs. I have yet to hit any peripheral power on/off combination that causes deep sleep problems with the 2 cards.
Before trying the Belkins items, I had bad experiences with Sonnet and OWC cards in my quicksilver though the sonnet worked fine in an older G4 DA. Apple Footer.This site contains user submitted content, comments and opinions and is for informational purposes only. Apple may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Apple can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the.
...'>Belkin Hi Speed Usb 2.0 5 Port Pci Card Drivers For Mac(25.04.2020)3 Port PCI High Speed USB 2.0 Adapter Card (3Ext/1int) (PCI330USB2) 3Ware 3War Internal SATA. Stratitec ICUSB25 USB 2.0 5-PORT Pci Upgrade Card. Computer has one USB 2.0 controller and three (or five, if you enable all the ports) USB companion controllers that report themselves as USB 1.1 devices. If you plug a USB 2.0 device into any port, the device functions at USB 2.0 speeds; the controller handles the logic internally.
Audiomidittweaker, welcome, this is such a random issue, even if is successful on someone else identical Mac, that is no indication that it will be on your machine being that so much depend on what you plug into these cards. I have a Adaptec USB PCI card it supports sleep and deep sleep, as long as there is no jump drive, Flashdrive or any other device without it own power supply plug in while sleeping.it was once an on going post but I see it was last updated:.My advice would be to check out the chipset in that card, if is the same as the other then expect the same results.JoePower Mac G4 Gigabit Ethernet Mac OS X (10.3.9) 1.5 GB Ram, ENCORE/ST G4, Tempo SATA, ATI Radeon 9000, Adaptec 4000. When I talked to the Mac specialist at my local Mirco Center, he said, \'Take one home try with on peripheral attached if it works keep it, if not bring it back\'. That\'s all I can tell you, there is no yes or no answer here.Do a \'sleep\' search above and you will get enough material to fill a library, read it all and you will still not have a yes or no answer on this matter.Also remember there are no standards for third party manufacturer to follow for making products for our computers.JoePower Mac G4 Gigabit Ethernet Mac OS X (10.3.9) 1.5 GB Ram, ENCORE/ST G4, Tempo SATA, ATI Radeon 9000, Adaptec 4000. I just bought a 5-port Belkin USB card and have similar problems. I have found the computer deep sleeps if I remove all peripherals connected to the card.
Beyond sleep issues, I\'m not sure if the card works at all with anything that is not self-powered. I installed the card at pci slot 4, and I may move it back to slot 2 (next to video card) and see if it works better there.
I didn\'t place the card at slot 2 in the first place because I was concerned about overheating- it would be very close to the video card. I guess I\'ll take the advice above and start reading other discussions!933mhz quicksilver Mac OS X (10.3.9). I had great success with the Belkin PCI USB 2.0 and Firewire cards.
My quicksilver G4 sleeps and wakes every time since the installation. I have many peripherals attached.
Ipod via usb, older firewire ipod, canon camera, 2 scanners and a couple external HDs. I have yet to hit any peripheral power on/off combination that causes deep sleep problems with the 2 cards.
Before trying the Belkins items, I had bad experiences with Sonnet and OWC cards in my quicksilver though the sonnet worked fine in an older G4 DA. Apple Footer.This site contains user submitted content, comments and opinions and is for informational purposes only. Apple may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Apple can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the.
...'>Belkin Hi Speed Usb 2.0 5 Port Pci Card Drivers For Mac(25.04.2020)